Effect Of Polymicrobial Peri-Implant Plaque On The Morphological Degradation And Titanium Ion Leaching Of The Adin Touareg S Dental Implant

Dr. Ajrish George. S; Dr. N.P. Muralidharan, Phd; Dr. Thiyaneswaran N, Phd

doi:10.69980/redvet.v25i1.2267

Dr. Ajrish George. S
Dr. N.P. Muralidharan, Phd
Dr. Thiyaneswaran N, Phd

DOI: https://doi.org/10.69980/redvet.v25i1.2267

Keywords: .........

Abstract

Peri-implantitis, a biofilm-mediated disease, is a major cause of late implant failure. This in vitro study investigated the degradation of a high-performance titanium dental implant (Adin Touareg S, conical connection) exposed to patient-derived polymicrobial plaque. Ten sterile implants were incubated individually with plaque samples collected from patients (n=10) diagnosed with mild/moderate peri-implantitis for 30 days. Microbial analysis identified six predominant species, with alpha-Haemolytic Streptococcus (40%) being the most prevalent. All tested species (100%) showed Sulphur-reducing and Iron-oxidizing activities, indicative of high corrosive potential. Scanning Electron Microscopy (SEM) revealed surface degradation, including a statistically significant increase in thread diameter (0.7 +/- 0.05 um) and the formation of distinct, species-specific defects. Cracks were primarily observed on the abutment (45.0%). Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) confirmed the release of titanium (Ti) ions into the broth, ranging from 18 ppm to 35 ppm. These findings confirm that while the Touareg S exhibits moderate resistance, it remains vulnerable to biofilm-induced biocorrosion and material loss.

Author Biographies

Dr. Ajrish George. S

MS implantology, Department of Implantology, Saveetha Dental College and Hospitals, Saveetha Institute of Medical and Technical Sciences, Chennai

Dr. N.P. Muralidharan, Phd

Professor, Department of Microbiology, Saveetha Dental College and Hospitals, Saveetha Institute of Medical and Technical Sciences, Chennai

Dr. Thiyaneswaran N, Phd

Professor and Head, Department of Implantology, Saveetha Dental College and Hospitals, Saveetha Institute of Medical and Technical Sciences, Chennai.

References

1. Albrektsson, T., & Johansson, C. (2001). Osteointegration. Journal of Prosthetic Dentistry, 85(2), 121-126.
2. Socransky, S. S., & Haffajee, A. D. (2005). Periodontal microbial ecology. Periodontology 2000, 38(1), 135-187.
3. Heitz-Mayfield, L. J. A., & Salvi, G. E. (2018). Peri-implant diseases. Periodontology 2000, 76(1), 177-190.
4. Buser, D., Lussi, A., & Hirt, H. P. (2018). Implant-Supported Restorations: Principles and Clinical Practice. Quintessence Publishing.
5. Souza, J. G., Cochetti, J., & Cacciatore, M. (2017). Microbiologically influenced corrosion (MIC) on dental implants: a narrative review. Journal of Oral Implantology, 43(6), 464-472.
6. Lessa, R. M., et al. (2020). Microbiologically induced corrosion of titanium dental implants: A review of the biological mechanisms and clinical implications. Materials, 13(15), 3393.
7. Renvert, S., & Giovannoli, J. (2020). The role of titanium particles in peri-implantitis: a literature review. Clinical Implant Dentistry and Related Research, 22(3), 263-270.
8. Attard, N. J., & Zarb, G. A. (2009). Immediate implant loading: part I—the biomechanical rationale. International Journal of Prosthodontics, 22(1), 21-27.
9. El-Masry, A. M., El-Kholy, M. S., & El-Hadad, A. R. (2021). SEM-EDS analysis of titanium dental implant surfaces in peri-implantitis. Journal of Oral and Maxillofacial Surgery, 79(6), 1313.e1-1313.e10.
10. Romanos, G. E., & Nentwig, G. H. (2009). The effect of the implant-abutment interface on the microleakage of bacteria. Clinical Implant Dentistry and Related Research, 11(2), 173-178.
11. Al-Haj Husain, A., et al. (2020). The effect of surface modifications on the corrosion behavior of titanium dental implants. Coatings, 10(9), 834.
12. Shibli, J. A., et al. (2012). Microbiological analysis of peri-implantitis sites using checkerboard DNA-DNA hybridization. Journal of Periodontology, 83(12), 1500-1508.
13. Assunção, W. G., et al. (2019). The influence of Streptococcus species biofilm on titanium surface roughness and corrosion. Journal of Applied Oral Science, 27.
14. Little, B., & Lee, J. (2007). Microbiologically influenced corrosion. Corrosion Engineering: Science and Technology, 42(2), 131-143.
15. Gout, C., et al. (2018). The role of sulfur-reducing bacteria in dental implant failure. Journal of Dental Research, 97(11), 1251-1258.
16. Safi, F. I., & Al-Qutub, M. A. (2019). The biological consequences of the microgap at the implant-abutment interface: a review. International Journal of Implant Dentistry, 5(1), 1-10.
17. Wang, M., et al. (2021). The synergistic effect of mechanical load and bacteria on the corrosion of titanium dental implants. Biofouling, 37(2), 163-176.
18. Olmedo, D., et al. (2018). Titanium particles shed from dental implants: an in vivo study in rabbits. Clinical Oral Implants Research, 29(1), 12-18.
19. Vayron, R., et al. (2012). Titanium particle release from dental implant components: in vitro and in vivo studies. Clinical Implant Dentistry and Related Research, 14(3), 381-391.
20. Gittard, S. D., et al. (2012). Development of a dynamic in vitro model for studying the effects of oral biofilm on titanium implant surfaces. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 100(2), 350-360.